Two Stage Snow Blower Service Package
We offer a fully customized service package specifically designed for 2-stage snow blowers, tailored to meet their specific requirements and to ensure you receive the ultimate protection for your investment.
Description
- Inspect and Replace the Sparkplug if Necessary
- Change the Oil
- Replace the Fuel Filter (If Applicable)
- Inspect and Clean the Fuel System
- Add Fuel Stabilizer to the Fuel Tank
- Inspect the Engine for Oil Leaks
- Inspect and Clean the Engine Cooling Fins if Necessary
- Inspect the Cables, Linkages, and Belts
- Inspect the Auger, the Auger Housing, and the Shear Pins
- Service the Grease Points
- Inspect and Test the Drive System
- Inspect the Overall Condition of the Tires
- Check and Balance the Tire Pressures
- Thoroughly Clean and Test the Unit
Service Packages
Standard Service:
- Replace the Sparkplugs, the Air Filter, and the Fuel Filter
- Replace the Oil and the Oil Filter
- Inspect and Clean the Fuel System
- Add Fuel Stabilizer to the Fuel Tank
- Inspect the Engine for Oil Leaks
- Inspect and Clean the Engine Cooling Fins if Necessary
- Inspect and Clean the Transmission Cooling Fins if Necessary
- Inspect the Wiring Harness and the Electrical Connections
- Test the Safety Features
- Test the Clutch and the PTO Switch
- Test the Battery and the Charging System
- Inspect the Linkages and the Cables
- Sharpen and Balance the Blades and Clean the Deck
- Inspect and Level the Cutting Deck If Necessary
- Inspect the Idler Pulleys and the Blade Spindles
- Remove and Inspect the Belts
- Service the Grease Points and Grease the Spindles (If Applicable)
- Inspect and Test the Drive System and Recommend Service if Necessary
- Inspect the Tire Treads and Overall Condition of the Tires
- Check and Balance the Tire Pressures
- Thoroughly Clean and Test the Unit
Basic Service:
- Inspect the Sparkplugs and Replace them if Necessary
- Inspect the Air Filter and the Fuel Filter and Replace Them if Necessary
- Replace the Oil and the Oil Filter
- Inspect the Fuel System
- Inspect the Engine for Oil Leaks
- Test the Battery and the Charging System
- Sharpen and Balance the Blades and Clean the Deck
- Service the Grease Points and Grease the Spindles (If Applicable)
- Check and Balance the Tire Pressures
- Thoroughly Clean and Test the Unit
